| |
Set Consisting of: |
Units |
| 406.005 |
For 2.0 mm Cortex Screws |
1 |
| 406.009 |
For 2.7 mm Cortex Screws and 3.0 mm Cannulated Screws |
1 |
| 406.013 |
For 3.5 mm Cortex, 4.0 mm Cancellous Bone Screws, and 3.5 mm and 4.0 mm Cannulated Screws |
1 |
| 406.017 |
For 4.5 mm Cortex Screws and 4.5mm Cannulated Screws |
1 |
| 406.025 |
For 6.5 mm Cancellous Bone Screws and 7.0 mm Cannulated Screws |
1 |
| HOLLOW REAMER: |
| 406.030 |
For 1.5 mm Cortex Screws |
1 |
| 406.033 |
For 2.0 mm Cortex Screws |
1 |
| 406.036 |
For 2.7 mm Cortex Screws and 3.0 mm Cannulated Screws |
1 |
| 406.039 |
For 3.5 mm Cortex, 4.0 mm Cancellous Bone Screws,and 3.5 mm and 4.0 mm Cannulated Screws |
1 |
| 406.042 |
For 4.5 mm Cortex Screws and 4.5mm Cannulated Screws |
1 |
| 406.045 |
For 6.5 mm Cancellous Bone Screws and 7.0 mm Cannulated Screws |
1 |
| CENTRERING PIN |
| 406.050 |
For 1.5 mm Cortex Screws |
1 |
| 406.054 |
For 2.0 mm Cortex Screws |
1 |
| 406.058 |
For 2.7 mm Cortex Screws and 3.0 mm Cannulated Screws |
1 |
| 406.062 |
For 3.5 mm Cortex, 4.0 mm Cancellous Bone Screws,and 3.5 mm and 4.0 mm Cannulated Screws |
1 |
| 406.066 |
For 4.5 mm Cortex Screws and 4.5mm Cannulated Screws |
1 |
| 406.070 |
For 6.5 mm Cancellous Bone Screws and 7.0 mm Cannulated Screws |
1 |
| CONNECTING END WITH CENTRERING PIN |
| 406.073 |
For 1.5 mm Cortex Screws |
1 |
| 406.075 |
For 2.0 mm Cortex Screws |
1 |
| 406.077 |
For 2.7 mm Cortex Screws and 3.0 mm Cannulated Screws |
1 |
| 406.079 |
For 3.5 mm Cortex, 4.0 mm Cancellous Bone Screws,and 3.5 mm and 4.0 mm Cannulated Screws |
1 |
| 406.081 |
For 4.5 mm Cortex Screws and 4.5mm Cannulated Screws |
1 |
| 406.083 |
For 6.5 mm Cancellous Bone Screws and 7.0 mm Cannulated Screws |
1 |
| CONICAL EXTRACTION SCREWS: |
| 406.090 |
For Threaded Washers |
1 |
| 406.092 |
For 1.5 mm and 2.0 mm Cortex Screws |
1 |
| 406.094 |
For 2.7 mm and 3.5 mm Cortex, 3.5 mm Cannulated,4.0 mm Cancellous Bone Screws, and 3.9 mm Locking Bolts |
1 |
| 406.096 |
For 4.5 mm Cortex, 6.5 mm Cancellous Bone Screws, 4.5 mm and 7.0 mm Cannulated Screws, and 4.9 mm Locking Bolts |
1 |
| 305.020 Counter Sink |
For 3.5, 4.0mm Screws ( 6.0mm Head), SS |
1 |
| 305.030 Counter Sink |
For 4.5, 6.5mm Screws ( 8.0mm Head), SS |
1 |
| 301.150 |
Solid Hexagonal Screwdriver, 4.0 mm width across flats |
1 |
| 306.010 |
Quick Coupling Handle ( T- Type), SS |
1 |
| 371.000 |
Sharp Hook |
1 |
| 406.110 |
Handle, with mini quick coupling |
1 |
| 406.113 |
1.5 mm/2.0 mm Cruciform Screwdriver Shaft |
1 |
| 406.116 |
Small Hexagonal Screwdriver Shaft 2.5 mm width across flats |
1 |
| 406.119 |
Large Hexagonal Screwdriver with T-Handle |
1 |
| 406.122 |
Large Hexagonal Screwdriver shaft |
1 |
| 406.125 |
Cannulated Driver, for Threaded Washers |
1 |
| 406.128 |
Forceps, for broken screw removal |
1 |
| 406.131 |
Hollow Gouge, for broken screw exposure |
1 |
| 406.134 |
Plier for Screw Removals |
1 |
| 406.140 |
S.S. Container |
1 |
