| |
Set Consists of : |
| 507.01 |
Diamond Pointed Bone Awl for Femoral ................. 1 |
| 507.02 |
Tissue Protector ............................. 1 |
| 507.038 |
Fexible Reaming Shaft with Fixed Reamer, Dia. 8.0mm. .............. 1 |
| 507.03 |
Flexible Reamer Shaft only (For Reamer Heads 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm.) ...... 2 |
| 507.23 |
Flexible Reamer Shaft only (For Reamer Heads 13.5, 14, 14.5, 15mm.)......... 1 |
| 510.9 to 510.13 |
Reamer Heads (Medullary), 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm, Set of 9 pieces...... 1 Set |
| 510.135 to 510.15 |
Reamer Heads (Medullary), 13.5, 14, 14.5, 15mm, Set of 4 pieces .................. 1 Set |
| 507.04 |
Medullary Tube ................................... 1 |
| 507.05 |
Reaming Rod 3.0mm Dia ................................ 1 |
| 507.103 |
Guide Rod / Reaming Rod Introducer .................... 1 |
| 507.08 |
Guide Rod 3.0mm Dia .......................................... 1 |
| 507.84 |
Extractor - Impactor ..................... 1 |
| 507.31 |
Protection Sleeve for 6mm Locking Bolts ..................... 1 |
| 507.32 |
Protection Sleeve for 8mm Locking Bolts ................... 1 |
| 507.36 |
Guide Wire Sleeve 2.0mm x 7.0mm ................ 1 |
| 507.37 |
Guide Wire Sleeve 2.0mm x 9.0mm ................. 1 |
| 507.34 |
Threaded Guide Wire 2.0mm Dia.( 6 pieces) ............ 6 |
| 507.39 |
Cannulated Step Drill Bit for 6mm Cannulated Locking Bolt .......... 1 |
| 507.40 |
Cannulated Step Drill Bit for 8mm Cannulated Locking Bolt ........................ 1 |
| 507.150 |
Proximal & Distal Jig for PFN/Recon Nail ............ 1 |
| 507.106 |
Hex Cap.................................... 1 |
| 507.30 |
Proximal Jig Assembly Connecting Part ............. 1 |
| 507.28 |
Hammering Device ................................... 1 |
| 507.152 |
Nail Holding Bolt for PFN & Recon Nails ....................... 2 |
| 507.48 |
Cannulated Hexagonal Screw Driver Extra Large - 3.5mm Tip .......................................... 1 |
| 208.10 |
Extra Large Hexagonal Screw Driver 3.5mm Tip ........ 1 |
| 507.16 |
Depth Gauge ........................................................... 1 |
| 507.110 |
Spanner 10mm, S.S. ..................... 1 |
| 507.61 |
Protection Sleeve, ID 8mm, OD 10mm for 4.5mm locking Bolt ..................... 1 |
| 507.64 |
Drill Sleeve 3.5mm ID , 8mm OD .................. 1 |
| 507.24 |
Universal Socket Wrench, 10mm .................. 1 |
| 507.116 |
Tomy Bar .................. 1 |
| 261.637 |
Drill Bit, Dia 3.5mm x 250mm, Straight Shank, with Trocar End ............................ 2 |
| 902.010 |
S.S.Container ..............................1set |
